Clinical Hub,Patient Education,Health and Nutrition Facts For You,Pediatrics, Parenting

Micro-Filtered Nasal Wash System “Squeeze Bottle” (7922)

Micro-Filtered Nasal Wash System “Squeeze Bottle” (7922) - Clinical Hub, Patient Education, Health and Nutrition Facts For You, Pediatrics, Parenting


Micro-Filtered Nasal Wash System “Squeeze Bottle”
Important: If more than one family member needs to use nasal saline, each person should use
their own bottle. This will prevent spreading germs between family members.
How does it work?
1. Pour the contents of the saline
packet into the bottle. First –time
users should start with 1 packet to
make an isotonic solution. As you
become more used to using the
system, you may work up to using 2
full packets for a hypertonic solution.
2. Fill the bottle with warm tap water to
the 8 oz mark on the bottle. Test the
water temperature before using.
3. Put the cap back on the bottle and
tighten. Gently shake the bottle until
the saline is dissolved.
4. Turn the bottle upside down so the
comfort tip is facing up. Lean over
the sink with your head bent down so
you are looking into the basin. Place
the comfort tip up to your right
nostril and gently insert the tip so
that it forms a comfortable seal. Aim
the tip at the back of your head, not
at the top of your head.
5. Squeeze the bottle gently so that the
solution enters your right nostril. Do
not inhale or “snort” the solution into
your nose. Breathe through your
6. In a few moments the solution will
begin to drain out of your left nostril.
Keep squeezing the bottle gently
until you have used about half of the
7. Remove the comfort tip from your
nostril and then exhale through both
of your nostrils to clean them of
excess mucus and solution. Gently
blow your nose into a tissue.
8. Repeat the procedure on your left
nostril with the rest of the solution.
9. When you are done hold the system
upside down over the sink and
squeeze a few times to clear the
solution still in the cap.
10. Holding the cap assembly over the
sink unscrew the filter by turning the
white ring on the bottom of the cap
counter clockwise while holding the
cap. Empty any solution that is left
into the sink. Reassemble the filter
making sure the black o-ring is
seated above the filter base threads.
Clean system after each use.
How do I clean it?
Clean the bottle: Rinse the bottle out with
water and let it air dry.
Clean the comfort tip: Remove the tip and
clean with soap and water and put back

Clean the cap: The outside of the cap can
be rinsed with water and dried.
What type of water can be used in the
micro-filtered system?
You can use tap water, distilled water or
commercially bottled water with the micro-
filtered system.
Warning: The micro-filtered system is
intended as a final filter for tap water that
is known to be safe for drinking. Do not
use with water that is microbiologically
unsafe or of unknown quality.
How long does the micro-filtered system
The micro-filtered system is certified to treat
50 gallons of water which is enough to fill
the 8 oz bottle 800 times. This lets you use
it up to 4 times a day for 6 months. Replace
micro-filtered system 6 months after the first
use or after 800 uses whatever comes first.
What if I have questions or concerns?
Pediatric Otolaryngology (ENT) Clinic.
Call (608)265-7760, weekdays from
8:00 am to 4:30 pm and ask to speak
with one of the nursing staff.

Your health care team may have given you this information as part of your care. If so, please use it and call if you
have any questions. If this information was not given to you as part of your care, please check with your doctor. This
is not medical advice. This is not to be used for diagnosis or treatment of any medical condition. Because each
person’s health needs are different, you should talk with your doctor or others on your health care team when using
this information. If you have an emergency, please call 911. Copyright © 10/2016 University of Wisconsin Hospitals
and Clinics Authority. All rights reserved. Produced by the Department of Nursing HF#7922.